[8] References
(Part of C++ FAQ Lite, Copyright © 1991-2006, Marshall Cline, cline@parashift.com)


FAQs in section [8]:


[8.1] What is a reference?

An alias (an alternate name) for an object.

References are frequently used for pass-by-reference:

 void swap(int& i, int& j)
 {
   int tmp = i;
   i = j;
   j = tmp;
 }
 
 int main()
 {
   int x, y;
   
...
   swap(x,y);
   
...
 }

Here i and j are aliases for main's x and y respectively. In other words, i is x — not a pointer to x, nor a copy of x, but x itself. Anything you do to i gets done to x, and vice versa.

OK. That's how you should think of references as a programmer. Now, at the risk of confusing you by giving you a different perspective, here's how references are implemented. Underneath it all, a reference i to object x is typically the machine address of the object x. But when the programmer says i++, the compiler generates code that increments x. In particular, the address bits that the compiler uses to find x are not changed. A C programmer will think of this as if you used the C style pass-by-pointer, with the syntactic variant of (1) moving the & from the caller into the callee, and (2) eliminating the *s. In other words, a C programmer will think of i as a macro for (*p), where p is a pointer to x (e.g., the compiler automatically dereferences the underlying pointer; i++ is changed to (*p)++; i = 7 is automatically changed to *p = 7).

Important note: Even though a reference is often implemented using an address in the underlying assembly language, please do not think of a reference as a funny looking pointer to an object. A reference is the object. It is not a pointer to the object, nor a copy of the object. It is the object.

TopBottomPrevious sectionNext sectionSearch the FAQ ]


[8.2] What happens if you assign to a reference?

You change the state of the referent (the referent is the object to which the reference refers).

Remember: the reference is the referent, so changing the reference changes the state of the referent. In compiler writer lingo, a reference is an "lvalue" (something that can appear on the left hand side of an assignment operator).

TopBottomPrevious sectionNext sectionSearch the FAQ ]


[8.3] What happens if you return a reference?

The function call can appear on the left hand side of an assignment operator.

This ability may seem strange at first. For example, no one thinks the expression f() = 7 makes sense. Yet, if a is an object of class Array, most people think that a[i] = 7 makes sense even though a[i] is really just a function call in disguise (it calls Array::operator[](int), which is the subscript operator for class Array).

 class Array {
 public:
   int size() const;
   float& operator[] (int index);
   
...
 };
 
 int main()
 {
   Array a;
   for (int i = 0; i < a.size(); ++i)
     a[i] = 7;    
// This line invokes Array::operator[](int)
   
...
 }

TopBottomPrevious sectionNext sectionSearch the FAQ ]


[8.4] What does object.method1().method2() mean?

It chains these method calls, which is why this is called method chaining.

The first thing that gets executed is object.method1(). This returns some object, which might be a reference to object (i.e., method1() might end with return *this;), or it might be some other object. Let's call the returned object objectB. Then objectB becomes the this object of method2().

The most common use of method chaining is in the iostream library. E.g., cout << x << y works because cout << x is a function that returns cout.

A less common, but still rather slick, use for method chaining is in the Named Parameter Idiom.

TopBottomPrevious sectionNext sectionSearch the FAQ ]


[8.5] How can you reseat a reference to make it refer to a different object?

No way.

You can't separate the reference from the referent.

Unlike a pointer, once a reference is bound to an object, it can not be "reseated" to another object. The reference itself isn't an object (it has no identity; taking the address of a reference gives you the address of the referent; remember: the reference is its referent).

In that sense, a reference is similar to a const pointer such as int* const p (as opposed to a pointer to const such as const int* p). In spite of the gross similarity, please don't confuse references with pointers; they're not at all the same.

TopBottomPrevious sectionNext sectionSearch the FAQ ]


[8.6] When should I use references, and when should I use pointers?

Use references when you can, and pointers when you have to.

References are usually preferred over pointers whenever you don't need "reseating". This usually means that references are most useful in a class's public interface. References typically appear on the skin of an object, and pointers on the inside.

The exception to the above is where a function's parameter or return value needs a "sentinel" reference — a reference that does not refer to an object. This is usually best done by returning/taking a pointer, and giving the NULL pointer this special significance (references should always alias objects, not a dereferenced NULL pointer).

Note: Old line C programmers sometimes don't like references since they provide reference semantics that isn't explicit in the caller's code. After some C++ experience, however, one quickly realizes this is a form of information hiding, which is an asset rather than a liability. E.g., programmers should write code in the language of the problem rather than the language of the machine.

TopBottomPrevious sectionNext sectionSearch the FAQ ]


[8.7] What is a handle to an object? Is it a pointer? Is it a reference? Is it a pointer-to-a-pointer? What is it?

The term handle is used to mean any technique that lets you get to another object — a generalized pseudo-pointer. The term is (intentionally) ambiguous and vague.

Ambiguity is actually an asset in certain cases. For example, during early design you might not be ready to commit to a specific representation for the handles. You might not be sure whether you'll want simple pointers vs. references vs. pointers-to-pointers vs. references-to-pointers vs. integer indices into an array vs. strings (or other key) that can be looked up in a hash-table (or other data structure) vs. database keys vs. some other technique. If you merely know that you'll need some sort of thingy that will uniquely identify and get to an object, you call the thingy a Handle.

So if your ultimate goal is to enable a glop of code to uniquely identify/look-up a specific object of some class Fred, you need to pass a Fred handle into that glop of code. The handle might be a string that can be used as a key in some well-known lookup table (e.g., a key in a std::map<std::string,Fred> or a std::map<std::string,Fred*>), or it might be an integer that would be an index into some well-known array (e.g., Fred* array = new Fred[maxNumFreds]), or it might be a simple Fred*, or it might be something else.

Novices often think in terms of pointers, but in reality there are downside risks to using raw pointers. E.g., what if the Fred object needs to move? How do we know when it's safe to delete the Fred objects? What if the Fred object needs to (temporarily) get serialized on disk? etc., etc. Most of the time we add more layers of indirection to manage situations like these. For example, the handles might be Fred**, where the pointed-to Fred* pointers are guaranteed to never move but when the Fred objects need to move, you just update the pointed-to Fred* pointers. Or you make the handle an integer then have the Fred objects (or pointers to the Fred objects) looked up in a table/array/whatever. Or whatever.

The point is that we use the word Handle when we don't yet know the details of what we're going to do.

Another time we use the word Handle is when we want to be vague about what we've already done (sometimes the term magic cookie is used for this as well, as in, "The software passes around a magic cookie that is used to uniquely identify and locate the appropriate Fred object"). The reason we (sometimes) want to be vague about what we've already done is to minimize the ripple effect if/when the specific details/representation of the handle change. E.g., if/when someone changes the handle from a string that is used in a lookup table to an integer that is looked up in an array, we don't want to go and update a zillion lines of code.

To further ease maintenance if/when the details/representation of a handle changes (or to generally make the code easier to read/write), we often encapsulate the handle in a class. This class often overloads operators operator-> and operator* (since the handle acts like a pointer, it might as well look like a pointer).

TopBottomPrevious sectionNext sectionSearch the FAQ ]


E-Mail E-mail the author
C++ FAQ LiteTable of contentsSubject indexAbout the author©Download your own copy ]
Revised Mar 1, 2006